Designing a family wall gallery is a fantastic way to showcase your cherished memories and create a visually captivating space in your home. By following a few simple steps and using the right tools, you can hang a family wall gallery that will become a beautiful focal point. In this blog, we will guide you through the process, from measuring to arranging and hanging the frames, ensuring your gallery looks both professional and personalized.
Tools Needed:
1. Measuring tape
2. Washi tape
3. Nine frames (or as per your preference)
4. Scissors
5. Water balance
6. Two-sided tape
7. Laser level
8. Hanging hardware (hooks, nails, or adhesive hooks)
Step 1: Measure and Mark the Center Artwork
Using a measuring tape, measure the desired height from the floor to the center of your artwork. The standard measurement for this is 150 cm, but you can adjust it according to your preference. Mark this measurement on the wall using a pencil or a small piece of washi tape. This mark will serve as a reference point for hanging the central frame.
Step 2: Arrange Frames
Lay out your frames on the floor or a large table, arranging them in the desired configuration. Experiment with different layouts until you find a visually pleasing arrangement. Take a photo of the layout for reference during the hanging process.
Step 3: Hang the Central Frame
Using a laser level, ensure that the frames in the top row are perfectly aligned. Adjust the height of the central frame if necessary. Once you are satisfied with the alignment, secure the central frame to the wall using appropriate hanging materials, such as hooks or nails.
Step 4: Create Additional Rows
Measure the distance between the central frame and the adjacent frame in the top row. This measurement will serve as a guide for spacing between each frame. The standard distance between frames is usually between 5-15 cm, but you can adjust it based on your preference. Use a measuring tape to ensure consistent spacing between frames.
Step 5: Level the Other Columns
To ensure that the frames in the subsequent rows are aligned, use a water balance. Place the water balance on top of the central frame and adjust the adjacent frames until the bubble in the water balance is centered. This will ensure that the frames are level with each other vertically.
Step 6: Hang the Remaining Frames
Following the same process as in Step 3, hang the remaining frames according to your pre-determined layout. Use a laser level to ensure the frames are straight and aligned horizontally.
Conclusion:
Creating a family wall gallery is a wonderful way to display your cherished memories and add a personal touch to your home. By following these steps and using the right tools, you can hang your frames with precision and create an eye-catching gallery that will be the highlight of any room. Get creative, and have fun.